English
- Used in iCONEC?UDF series ?ber optic patch panels to realize the connection and deployment of patch cords and pigtails between devices and in patch panels.
Adapter Panel (UDF)
The UDF series adapter panel provides well-timed and effec-tive port management for MTP or LC connectors to realize the connection management of MTP or LC connectors. Multiple speci?cations of con?gurations are available, which can support the use of hardware products in iCONEC?UDF solutions. The panel is used in conjunction with on-site installed connectors, or for the cabling of pre-installed connecors directly from devices to interconnected hardware.
Details
Applications
Characteristics
- The schemes of ?xing distributed adapters consider the operation of plugging and unplugging by one hand.
- Duplex LC adapters with built-in dustproof covers are used to prevent dust effectively.
- DLC and MTP panels can be applied to the cabling installation from the inside of ?ber optic patch panels to improve the ef?ciency.
- The hierarchical arrangement perfectly matches the wire trimming devices in the front of the UDF patch panel to make wiretrimming simple and reliable.
Main Technical Parameters
|
百度 这五种观向。
Product Model |
Technical Index |
|---|---|
|
Product Size |
482mm*460mm*44mm（1U） 482mm*460mm*177mm（4U） |
|
Height |
1U/4U |
|
Color |
Black |
|
Adapter |
The adapter panel should be purchased separately |
|
Material Composition |
The box is made of high-quality cold-rolled steel, and the plastic parts are sprayed with electrostatic epoxy powder on the surface, the flame retardant property of which can meet the requirements of GB5169.7 Experiment A. |
|
Adapter Type |
LC, MTP, MPO, etc. |
|
Electrical Performance |
|
|
Using Environment |
Indoor |
|
Product Standard |
GB/T 2423.1-2008 Environmental Testing for Electric and Electronic Products - Part 2: Test Methods - Test A: Low temperature GB/T 2423.2-2008 Environmental Testing for Electric and Electronic Products - Part 2: Test Methods - Test B: High temperature, GB/T 2423.3-2006 Environmental Testing for Electric and Electronic Products Part 2: Test Methods Test Cab: Steady damp-heat test, GB/T 2423.17-2008 Environmental Testing for Electric and Electronic Products Part 2: Test Methods - Test Ka: Salt mist, GB/T 2829-2002 Periodic Inspection Counting Sampling Procedures and Table (applicable to inspection of the process stability) GB/T 3873-1983 General Technical Specifications for Packing of Communications Equipment Products GB/T 5169.9-2006 Fire Risk Testing for Electric and Electronic Products - Part 9: Guideline for assessing the fire hazard, Use of preselection testing procedures, GB/T 9286-1998 Paints and Varnishes-Cross Cut Test for Films GB/T 12507.1-2000 Connectors for optical fibres and cables Part 1: Generic specification, YD/T 778-2006 fiber optic patch panel |
|
Operation Temperature |
-25℃ to +55℃ |
|
Environment Humidity |
≤ 93%（+40℃） |
|
Atmospheric Pressure |
70 kPa to 106 kPa |
Product Model
|
Product Model |
Product Description |
|---|---|
|
iCONEC-DFUMTUMDE12 |
UDF Module/1*12-Core MTP to 6D LC, G.657.A2 |
|
iCONEC-DFUMTUMDA12 |
UDF Module/1*12-Core MTP to 6D LC, OM3 |
|
iCONEC-DFUMTUMDN12 |
UDF Module/1*12-Core MTP to 6D LC, OM4 |
|
iCONEC-DFUMTUMDD12 |
UDF Module/1*12-Core MTP to 6D LC, OM5 |
|
iCONEC-DFUMTUMDE24 |
UDF Module/3*8-Core MTP to 12D LC, G.657.A2 |
|
iCONEC-DFUMTUMDA24 |
UDF Module/3*8-Core MTP to 12D LC, OM3 |
|
iCONEC-DFUMTUMDN24 |
UDF Module/3*8-Core MTP to 12D LC, OM4 |
|
iCONEC-DFUMTUMDD24 |
UDF Module/3*8-Core MTP to 12D LC, OM5 |
|
iCONEC-DFUMPUMDE12 |
UDF Module/1*12-Core MPO to 6D LC, G.657.A2 |
|
iCONEC-DFUMPUMDA12 |
UDF Module/1*12-Core MPO to 6D LC, OM3 |
|
iCONEC-DFUMPUMDN12 |
UDF Module/1*12-Core MPO to 6D LC, OM4 |
|
iCONEC-DFUMPUMDD12 |
UDF Module/1*12-Core MPO to 6D LC, OM5 |
|
iCONEC-DFUMPUMDE24 |
UDF Module/3*8-Core MPO to 12D LC, G.657.A2 |
|
iCONEC-DFUMPUMDA24 |
UDF Module/3*8-Core MPO to 12D LC, OM3 |
|
iCONEC-DFUMPUMDN24 |
UDF Module/3*8-Core MPO to 12D LC, OM4 |
|
iCONEC-DFUMPUMDD24 |
UDF Module/3*8-Core MPO to 12D LC, OM5 |
|
iCONEC-DFUPDUM06 |
UDF adapter panel/6-port mutil-mode duplex LC, aqua green |
|
iCONEC-DFUPDUD06 |
UDF adapter panel/6-port mutil-mode duplex LC, lime green |
|
iCONEC-DFUPDUS06 |
UDF adapter panel/6-port single-mode duplex LC, blue |
|
iCONEC-DFUPMT006 |
UDF adapter panel/6-port MTP adapter, black (Uscon adapter) |
|
iCONEC-DFUP000 |
UDF blind plate |
|
iCONEC-DFUTRAY12 |
UDF fiber splice tray/12 cores |
|
iCONEC-DFUDTSL01 |
UDF rack-mounted fiber optic patch panel/empty box, 1U, sliding type, installed with max 12 12-core MTP/LC modules or 12-core DLC panels or blind plates |
|
iCONEC-DFUDTSL04 |
UDF rack-mounted fiber optic patch panel/empty box, 4U, sliding type, installed with max 48 12-core MTP/LC modules or 12-core DLC panels or blind plates |
|
iCONEC-DFUDZSL01 |
UDF rack-mounted fiber optic patch panel/empty box, 1U, sliding type, installed with max 6 24-core MTP/LC modules |
|
iCONEC-DFUDZSL04 |
UDF rack-mounted fiber optic patch panel/empty box, 4U, sliding type, installed with max 24 24-core MTP/LC modules |
Remarks: In case of special requirements of customers, design and customization can be carried out according to speci?c requirements.?
Related products
